Dataman -40Pro User Manual page 79

This options associates with using of Log window. All reports
for Log window can be written into the Log file too. The Log file
name is "Report.rep" as default. The control program creates
this file with name and directory specified in Log file name edit
box.
Following Log file options are available:
• No
default, content of Log window is not copied to
Log file, i.e. all reports will be displayed to Log
window only
• New
deletes old Log file and creates new one during
each start of control program
• Append adds Log window reports into existing Log file, If
file does not exist, the new file will be created
The Log file settings can be saved to disk by command
Options / Save options.
Display errors
This option allows to set a form of error displaying as a result
of programmed data verifying. Errors can be displayed to the
screen (max. 45 differences), saved to error file of differences
on the disk or it will not be displayed. In case the displaying
errors are turned off, the control program reports a warning
message in INFO window only. The default error file name is
"Verify.err". The file name and directory can be user specified
in edit box Error file name.
Following Display errors settings are available:
• None
• Screen
• File
The Display errors settings can be saved to disk by command
Options / Save options.
Save options
Page allows you to select the program options saving when
exiting program. Three options are available here:
• Don't save
• Auto save
• Prompt for save
Other
Page Other allows user to manage other program settings.
does not display error values on screen nor to
the file
default, displays errors to Log window
writes error reports to error file
don't save options during quitting
program and don't ask for saving
options
save options during quitting program
without asking for saving options
program asks user for saving options
before quitting program. User can
select to save or not to save options
79
Software