Dataman -40Pro User Manual page 52

Please read the documentation to the chip you want to program
for explanation of all used terms.
List of commonly used items:
group Addresses:
device start address (default 0)
device end address
buffer start address
Split
This option allows to set special mode of buffer when
programming or reading device. Using split options is
particularly useful when using 8-bit data memory devices
in 16-bit or 32-bit applications.
Following table describes buffer to device and device to
buffer data transfer
Split type Device
None
Even
Odd
1./4
2./4
3./4
4./4
Real addressing will be following: (all addresses are
hexadecimal)
Split type Device addresses
None
Even
Odd
1./4
2./4
3./4
4./4
Terms explanation:
Access
Device[ADDR].
Access
Buffer[ADDR].
ADDR value can be from zero to device size (in bytes).
All addresses are byte oriented addresses.
group Insertion test:
insertion test
If enabled, the programmer checks all pins of the
programmed chip, if have proper connection to the ZIF
(default device size-1)
(default 0)
(default none)
Device[ADDR]
Device[ADDR]
Device[ADDR]
Device[ADDR]
Device[ADDR]
Device[ADDR]
Device[ADDR]
00 01 02 03 04 05
00 01 02 03 04 05
00 01 02 03 04 05
00 01 02 03 04 05
00 01 02 03 04 05
00 01 02 03 04 05
00 01 02 03 04 05
to device address
to buffer address
(default ENABLE)
52
Buffer Address
assignment
Buffer[ADDR]
Buffer[2*ADDR]
Buffer[1+(2*ADDR)]
Buffer[4*ADDR]
Buffer[1+(4*ADDR)]
Buffer[2+(4*ADDR)]
Buffer[3+(4*ADDR)]
Buffer addresses
00 01 02 03 04 05
00 02 04 06 08 0A
01 03 05 07 09 0B
00 04 08 0C 10 14
01 05 09 0D 11 15
02 06 0A 0E 12 16
03 07 0B 0F 13 17
ADDR is written
ADDR is written
as
as