Programmer - Dataman -40Pro User Manual

Software tools:
Lattice: ispLEVER, ispVM System ISP Programming
Software,
(converts a serial vector file to a VME file)
Device / Device info
The command provides additional information about the
current device - size of device, organization, programming
algorithm and a list of programmers (including auxiliary
modules) that supported this device. You can find the package
information, part number description and full information for
ISP implementation. For example: description of ISP connector
pins for currently selected chip, recommended target design
around in-circuit programmed chip.
The reserved key <Ctrl+F1> is the HOT key.

Programmer

Menu Programmer includes commands used for work with
programmers.
Programmer / Find programmer
This menu is for programmer related operations. This
command contains following items:
Programmer – Searches for an installed programmer. The
control program will find all supported programmers.
Establish communication - allows manual or automatic
establishing communication for a new programmer.
PAC-Designer
72
Software, svf2vme utility