Table of Contents
Advertisement
Figure 3 IP addresses
NOTE:
There are two HP 40GbE QSFP+ ports per switch. Each 40 GbE QSFP+ port is convertible
to 10GbE SFP+ with an adapter. Two adapters are provided with each rack.
In addition, there are thirty 1GbE/10GbE RJ45 ports per switch.
There are two Ethernet switches, each switch with fourteen available ports, for a total of fifty-six
available 10Gb/1Gb ports on both switches. There are also two 40Gb ports on each switch.
TIP:
HP recommends assigning Ethernet ports beginning at port 44 and working backward,
ending at port 17.
Available ports are shown in
"Ethernet ports" (page
8).
Figure 4 Ethernet ports
8
The HP CS300 Vertica appliance
Advertisement
Table of Contents
