Page 1
User Manual Wide Color Video Phone CAV-43T2 • Thank you for purchasing COMMAX products. • Thank you for purchasing COMMAX products. • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
Table of Contents 1. Warnings and Cautions................2 Part Names ....................4 Package Contents ..................4 Wiring and Connection Instructions............5 Installation ....................Operation ......................6 Wh en th e product does not function properly ......... Caution in use..................10 Specifications ..................11 1.
Page 3
Warning & Caution Please don’ t disassemble, If an abnormal sound, burning Please don’t insert any When cleaning the product, smell or smoke is coming out repair or rebuild this product metallic or burnable materials please rub it with a soft and arbitrarily (please contact the of the product, please plug out into the ventilation hole.
▷ Polarity of the camera connector 1. Red: Talk (Audio) 3. Yellow: Power (+12V) 2. Blue: GND 4. White: Video Each device should be connected by CAV-43T2 CAV-43T2 CDS-800M separated cables. GUARD If you use UTP CABLE[CAT.5] for CAMERA1and CAMERA2, 2 lines of...
6. Operation 1. Telephone 1) To make a phone call Telephone lamp will be on and the bell sounds when the handset is picked up. If the call is answered, you can talk to answerer. 2) To answer a phone call - If the phone rings, the telephone lamp blinks and phone bell sounds.
Page 7
3) Monitoring function - The screen is turned on if you press the door button in stand-by mode. - The screen will be turned on for 30 seconds after the time you press the door button. - By picking up the handset during monitoring, you can talk to a person at the door. (On stand-by mode)Operation == being put handset down - If you press the door button, the monitor works as follows in order.
Page 8
Ratio adjustment ① Use UP/DOWN button to move SCREEN MODE setting menu in UTILITY list ② Press MENU button to enter. ③ Adjust SCREEN RATIO with UP/DOWN button. ④ If you finish the setting, press MENU button to exit. 3) EXIT : Back to UTILITY list(3-1-1) 3-1-2 INFORMATION (To check model name and version) In order to check the product information, press the MENU button and enter the...
7. When the product does not function properly If the monitor is not Check if the power has been turned on. turned on Checkpoint 1. Check the voltage. Checkpoint 2. Check the connection. Checkpoint 3. If you cannot hear any Check if volumn switch sound.
8. Caution in use Do not install the product close to such electronic goods as TVs and videos. (It may have adverse effect on the screen.) Do not install the product where ammonia, acidic materials and poisonous gases are generated. (It may cause a breakdown.) Do not install the product where there are direct rays of the sun or strong reflection.
9. Specification Model name CAV-43T2 Dimension Rating Voltage 100-240V~, 50/60Hz (FREE VOLTAGE) onsumption Stand-by : 4W Working : 15W(MAX) Transmission Entrance 4wires polarity, Telephone 2wires creen size 4.3" TFT-DIGITAL LCD Call mode DUPLEX Entrance : electronic chime Ringing sound Telephone : electronic ring 60 ±10sec (Communicating)
Page 12
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com PM0243T20010 Printed In Korea / 2016.09.104...