Download Print this page

HAMPTON BAY 286-780 Installation Manual

Hide thumbs Also See for 286-780:

Advertisement

Hampton Bay Lifetime Limited Warranty
The retailer warrants the fan motor to be free from defects in workmanship and
material present at time of shipment from the factory for a lifetime after the date of
purchase by the original purchaser. The retailer also warrants that all other fan parts,
excluding any glass or plexiglass blades, to be free from defects in workmanship and
material at the time of shipment from the factory for a period of one year after the date
of purchase by the original purchaser. We agree to correct such defects without
charge or at our option replace with a comparable or superior model if the product is
returned to the retailer. To obtain warranty service, you must present a copy of the
receipt as proof of purchase. All costs of removing and reinstalling the product are
your responsibility. Damage to any part such as by accident or misuse or improper
installation or by affixing any accessories, is not covered by this warranty. Because
of varying climatic conditions in the United States this warranty does not cover any
changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.
Brass finishes of this type give their longest useful life when protected from varying
weather conditions. A certain amount of wobble is normal and should not be
considered a defect. Servicing performed by unauthorized persons shall render the
warranty invalid.
There is no other express warranty. The retailer hereby
disclaims any and all warranties, including but not limited to.
merchantability and fitness for a particular purpose to the extent permitted by
law. The duration of any implied warranty which cannot be disclaimed is limited to
the time period as specified in the express warranty.
limitation on how long an implied warranty lasts, so the above limitation may not
apply to you. The retailer shall not be liable for incidental, consequential, or
special damages arising out of or in connection with product use or performance
except as may otherwise be accorded by law. Some states do not allow the
exclusion of incidental or consequential damages, so the above exclusion or
limitation may not apply to you. This warranty gives specific legal rights, and you
may also have other rights which vary from state to state. This warranty supersedes
all prior warranties.
Those of
Some states do not allow
Lifetime Limited Warranty
Date Purchased
Store Purchased
286-780
Model No.
Serial No.
219032
Vendor No.
792145330783
UPC

Advertisement

loading

Summary of Contents for HAMPTON BAY 286-780

  • Page 1 Hampton Bay Lifetime Limited Warranty The retailer warrants the fan motor to be free from defects in workmanship and Date Purchased material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The retailer also warrants that all other fan parts,...
  • Page 2: Table Of Contents

    Safety Rules.......................... Unpacking Your Fan......................Installing Your Fan........................ Installing the Light Kit......................Operating Your transmitter....................Care of Your Fan........................Troubleshooting........................Specifications........................Table of Contents...
  • Page 3: Safety Rules

    1. To reduce the risk of electric shock, insure electricity has been turned 8. Avoid placing objects in the path of the blades. off at the circuit breaker or fuse box before beginning. To avoid personal injury or damage to the fan and other items, be 2.
  • Page 4: Unpacking Your Fan

    LIGHT / DIMMER FAN OFF Unpack your fan and check the contents. You should have the following items: Set of blades (5) 7. Light plate 13. Loose parts bag containing: 2. Canopy assembly Glass shade a. Blade attachment hardware Ball/downrod assembly (1) Receiver+6 wire nuts (16 screws, 16 rubber washers) &...
  • Page 5: Installing Your Fan

    Figure 4 Figure 2 To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown in Figure 4 (available at your Hampton Bay Retailer). 3. Installing Your Fan...
  • Page 6 the motor housing (Fig.7). Carefully insert the 3. Insert the support pin in the holes at the Hanging the Fan hanger pin through the holes in the collar and top of the 6" downrod and slide the to turn off the power. Follow REMEMBER downrod.
  • Page 7 combination of settings will operate the fan as Pin in To the fan ground wires; otherwise connect Motor wires locked long as the transmitter and receiver are set to Ball/downrod position the hanging bracket ground wire to the assembly the same position.(Figure 8) m o u n t i n g b r a c k e t .
  • Page 8 Finishing the SUPPLY CIRCUIT Installation Ground Outlet box Conductor Step 1. Tuck connections neatly into ceiling BLACK Hanger outlet box. Outlet Box bracket Green Step 2. Slide the canopy up to ceiling and Screws Ground WHITE Lead over the 2 screws on hanger bracket. Rotate canopy clockwise.
  • Page 9 Attaching the Fan Screws Blades Motor Rubber washer Slot Step 1 Attach the blades to the blade arms using three screws and rubber washers as shown in Figure 12. Start a screw into the arm, Blade Blade do not tighten. Repeat for the 2 remaining Figure 12 Blade arm screws and washers.
  • Page 10 All blades are grouped by weight. Because WARNING natural woods very in density, the fan may TO REDUCE THE RISK OF PERSONAL INJURY, wobble even though the blades are weighed DO NOT BEND THE BLADE HOLDERS equally. WHILE INSTALLING, BALANCING THE BLADES, OR CLEANING THE FAN.
  • Page 11: Installing The Light Kit

    NOTE: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. 1. Attach the light plate to the light plate holder by feeding the wires (blue and white) out of the fans through the hole of light plate and then screw it onto the light plate holder with 3 screws, be sure to slide the light plate to the 2...
  • Page 12: Operating Your Transmitter 10

    Speed settings for warm or cool weather Restore power to ceiling fan and test for depend on factors such as the room size, proper operation. ceiling height, number of fans, etc. 1. "LO, MED, HI" buttons: The Reverse switch is located on top of the These three buttons are used to set the fan motor assembly.
  • Page 13: Care Of Your Fan

    Here are some suggestions to help you 3. You can apply a light coat of Installing the battery: maintain your fan furniture polish to the wood blades for additional protection and enhanced Install 9 volt battery (not included), to 1 . B e c a u s e o f t h e f a n ' s n a t u r a l beauty.
  • Page 14: Troubleshooting 12

    Problem Solution Fan will not start. 1.Check circuit fuses or breakers. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. 3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency. Fan sounds noisy.
  • Page 15: Specifications

    These are approximate measures. They do not include Amps and Wattage used by the light kit. Distributed by Your Other Warehouse, LLC 12100 Little Cayman Dr. Baton Rouge, LA 70809 2005 Homer TLC, Inc. All Rights Reserved Hampton Bay is a registered trademark of Homer TLC, Inc. 13. Specifications...