Advertisement
Quick Links
Advertisement
Related Manuals for dji OSMO X5 Adapter
Summary of Contents for dji OSMO X5 Adapter
- Page 1 OSMO X5 Adapter Quick Start Guide V1.0...
-
Page 2: Disclaimer And Warning
Introduction The Osmo X5 Adapter allows the Zenmuse X5 Series gimbal and camera to be used with the Osmo handle. It also provides a communication port for the DJI Focus to control aperture and focus. -
Page 3: Specifications
Specifications Weight: 155 g Installation Important The Zenmuse X5 or X5R must be upgraded on the Osmo handle with Osmo firmware v01.01.00.10 or higher. Mounting the X5 Adapter onto the Osmo Handle 1. Rotate the gimbal securing ring to its unlocked position. 2. - Page 4 4. Screw the X5 Adapter’s knob to the Rosette Mount on the side of the Osmo handle. Mounting the Zenmuse X5 onto the X5 Adapter 1. Rotate the X5 Adapter’s gimbal securing ring to the unlocked position. 2. Mount the Zenmuse X5 gimbal and camera, making sure the pan motor sits nicely in the X5 Adapter.
- Page 5 2. Connect the communication ports on the Focus Remote Controller and the X5 Adapter using the DJI Focus-Osmo CAN-Bus cable. The mounted Focus Remote Controller should look like this. The DJI Focus-Osmo CAN-Bus cable can be purchased on the official • DJI Store.