Sony CMT-BX50BTi Operating Instructions Manual page 20

Playing music on this system
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
1
Select a function other than the
Bluetooth function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
2
Establish a connection with the
Bluetooth headphones.
Press and hold BLUETOOTH OPR

on the unit for about 2 seconds
until the BLUETOOTH indicator
lights up, then release the button.
Sound output from the speakers is
stopped.
If more than one Bluetooth device
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
Once the connection is established,
the system display changes as follows:
"Connect"  Name of the Bluetooth
device
GB
20
CMT-BX50BTi.GB.3-293-640-11(1)
3
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone's controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your

Bluetooth headphones.
4
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit)
To cancel the connection with

Bluetooth headphones
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until the
BLUETOOTH indicator
Sound is output from the speakers.
Notes
 If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
 When the system is changed to a function
other than the Bluetooth function and
BLUETOOTH OPR
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
 Th is system stores separate volume settings
for when listening through the speakers
or PHONES jack
listening through Bluetooth headphones.

.


turns off .

on the unit is pressed

on the unit, or when
Play
You ca
the iPo
Use bu
operat
1
Se
Pre
FU
rep
2
Pla
3
Sta
Pre

4
Ad
Pre
the
CMT-