Sony CMT-BX50BTi Operating Instructions Manual page 30

Micro hifi component system
Hide thumbs Also See for CMT-BX50BTi:
Table of Contents

Advertisement

iPod
There is no sound.
 Make sure the iPod is connected
securely.
 Make sure the iPod is playing music.
 Adjust the volume.
The sound is distorted.
 Turn down the volume.
 Set the "EQ" setting of the iPod to
"OFF" or "Flat".
The iPod cannot be charged.
 Make sure the iPod is connected
securely.
Tuner
Severe hum or noise, or stations
cannot be received. ("TUNED" or
"STEREO" fl ashes on the display.)
 Connect the antenna properly.
 Find a location and an orientation that
provide good reception, and then set
up the antenna again.
 Keep the antennas away from the
speaker cords and the power cord to
avoid picking up noise.
 Connect a commercially available
external antenna.
 Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
 Turn off nearby electrical equipment.
GB
30
CMT-BX50BTi.GB.3-293-640-11(1)
To change the AM tuning interval
Th e AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas).
Use buttons on the unit to change the
AM tuning interval.
1
Tune in any AM station, and then
turn off the system.
2
While holding down ENTER
/
.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
1
Press FUNCTION +/ (or FUNCTION
on the unit)
repeatedly to select
the CD function, and then turn off
the system.
2
After "STANDBY" stops fl ashing, press
/
on the unit while holding
down 
on the unit.
"CD POWER OFF" appears. With CD
player power turned off , disc access
time is increased. To turn on CD
player power, repeat the procedure
until "CD POWER ON" appears.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings.
Use buttons on the unit to reset the
system to its factory default settings.
1
Disconnect and reconnect the power
cord, and then turn on the system.
Press 
2
, VOLUME +
at the same time.
All user-confi gured settings, such as
preset radio stations, timer, and the
clock, are deleted.
, press
and /
Mes
CD/MP
Comp
norm
LOCK
Con
No Di
or y
be p
No Ste
or fi
CD Ov
the d
play
Push S
d
Readi
info
are n
Step F
than
TIME
time
CMT-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents