Driver Control; Main Panel; Steering Wheel Module - Seat Leon Cup Racer TCR 2016 User Manual

2

DRIVER CONTROL

In this section, it is explained how the driver can handle the different commands and functions of the car.
2.1

Main panel

Lights switch
Turn indicator
Function Remarks
Ignition switch: It activates the power to all devices. The Main Switch has to be active.
Main switch:
It activates the power supply.
It activates the low beam. High beam and flash activation buttons are placed on
Lights switch:
the steering wheel module.
It activates the left and right turn lights. A green alarm on the display appears
Turn indicator:
showing that the turn light is blinking.
Turning the balance wheel you can balance the brake pressure from front to
back or vice versa.
Brake balance:
Do not press the brake pedal while moving the balance wheel.
Through the driver display you can check the front and rear brake pressure and
the balance in percentage.
Notes:

To start the car, always proceed in this order: Main switch and later ignition switch.

The correct procedure to stop the car is the following:
1. Stop the engine using only the yellow switch (ignition switch/KL-15).
2. Wait at least 60 seconds. If the waiting time is lower, the OBD faults memory is not saved.
3. Switch off the car using the red switch (main switch/KL-30).

If this procedure is followed correctly the OBD faults memory is saved and these faults can be
checked with the diagnostics tools at any time thereafter. These faults are saved until the memory
is deleted manually using the diagnostics program.
The diagnostics tool DiagRA-LE is recommended for customers to be able to check the cars.
2.2

Steering wheel module

The electronic steering
activating different functions without removing hands
from the steering wheel.
Some buttons have double functionality.
Brake balance
wheel module permits
Ignition switch
Main switch
10