Fuel Level Display - Seat Leon Cup Racer TCR 2016 User Manual

Table of Contents

Advertisement

3.5

Fuel level display

All new SEAT Leon TCR cars have a fuel display to control the fuel remaining at the tank. It is tied to the
roll cage in the rear right door area. The display has to be set after each refuelling. This setting is very
important to get the correct fuel level because it is calculated by the fuel consumption sent from the engine
ECU.
There is a light sensor for automatic brightness
trimming.
Two sensitive zones below the four digits allow
menu navigation.
It is important not to touch the front panel when
it is switching on due to the initial capacitance
setting during start up.
Also take special care wiping with hand the
front panel if device is switched on.
Electrostatics charge could affect the sensitive
touch and set undesired actions.
Terminology:
Following, the terminology description to understand future command tables:
Llp: Left long push (>1s)
Rlp: Right long push (>1s)
Lsp: Left short push (<1s)
Rsp: Right short push (<1s)
STout: Short Timeout (1s)
LTout: Long Timeout (8s)
Fuel level adjustment:
This menu allows the following possibilities:
Set fuel level to full tank value.
Add/remove a fuel quantity to the actual value.
Set an absolute quantity (litres without decimal).
When the value is shown (and blinking), a right short push increases this value litre by litre and a
left short push decreases this value.
Maintaining right/left long push, the value is increased/decreased 10 litres by 10 litres.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents