Charging The Device - Xplore DT-08 User Manual

Charging the Device

Charging with the Single Slot Charger
1. Unfasten the power cable cover screw with a screwdriver, and
remove the cover.
2. Connect the AC/DC adaptor to the power connector of the
charging cradle.
3. Tighten the power cable cover screw to hold the cable in position.
4. Plug the AC/DC adaptor into a suitable power socket. The cradle
power LED will turn green when power is supplied to the cradle.
5. Insert the device to the charging slot. The device charging LED
will fl ash orange while charging, and turn solid orange when fully
8
Charging with the Multi-slot Cradle
To charge the device with the multi-slot charging cradle:
1. Connect the AC/DC adaptor to the power connector of the
charging cradle.
2. Plug the AC/DC adaptor into a suitable power socket. The cradle
power LED will turn green when power is supplied to the cradle.
3. Insert the device to the charging slot. The device charging LED
will fl ash orange while charging, and turn solid orange when fully
charged.
3
1
2
9