Table of Contents
Advertisement
Using the Device
Viewing System Information
1.
Select Application drawer > Settings > About tablet.
2.
Scroll to view Model number, Android version, Kernel version, and
Build number.
3.
Click Status to view Serial number, Battery status, Battery level, IP
address, Wi-Fi MAC address, Bluetooth address, and Up time.
Using Wi-Fi
To connect to a Wi-Fi network:
1.
Select Application drawer > Settings > Wi-Fi.
2.
Slide the Wi-Fi On/Off switch to the ON position.
3.
Click Wi-Fi, and then select a network listed
4.
Input the password when prompted.
5.
Select the Lock Single Network checkbox to lock the device to the
selected network.
6.
Select Show advanced options to enter static IP settings/ Proxy
settings if needed.
7.
Click Connect.
Using Bluetooth
To connect to a Bluetooth device:
1.
Select Application drawer > Settings > Bluetooth.
2.
Slide the Bluetooth On/Off switch to the ON position. Ensure the
other Bluetooth device is set to discovery mode within range.
3.
Click Bluetoot, and select the required device under AVAILABLE
DEVICES. Click SEARCH FOR DEVICES if it does not appear in
the list.
4.
Input PIN when prompted, and then click OK.
5.
Input the same PIN on the selected device if prompted.
6.
Upon completing the pairing, the selected device is displayed under
PAIRED DEVICES.
12
Using NFC
To turn on the NFC feature:
1.
Select Application drawer > Settings > More.
2.
Select the NFC checkbox to turn on NFC.
Note: Position the tag within 2mm of the NFC reader area to ensure
successful scans.
Adjusting Volume
1.
Select Application drawer > Settings > Sound > Volumes.
2.
Drag the slide bar to adjust the volume.
Adjusting Display Settings
Adjusting Brightness
1.
Select Application drawer > Settings > Display > Brightness.
2.
Drag the slide bar to adjust the backlight.
Adjusting Sleep Mode Setting
To change the screen setting in sleep mode:
1.
Select Application drawer > Settings > Display > Sleep mode
setting.
2.
Select Sleep or Screen dim to trun off or dim screen
Adjusting Sleep Mode Timeout
1.
Select Application drawer > Settings > Display > Sleep.
2.
Select the idle period before entering sleep mode.
Adjusting Sleep Control Settings
To enable the sleep control opt ions:
1.
Select Application drawer > Settings > Display > Sleep control.
2.
Check the checkbox to enable the below sleep control options, and
then click OK to exit.
• Touch screen to turn on device: Click the screen to exit sleep
mode.
13
Advertisement
Table of Contents
