Table of Contents
Advertisement
Make and receive calls on landline phone (Pairing) (Continued)
3
®
Put the Bluetooth
landline phone into pairing mode.
See the instructions that came with the Bluetooth
If you are prompted for passkey, enter "0000".
4
Make sure that the Bluetooth
LED 1 will slowly blink green once per 2-3 seconds to indicate that the phone is connected
to the Hearing Hub through Bluetooth
See the instructions that came with the Bluetooth
®
After the Bluetooth
landline phone has been successfully registered (paired) with the
Hearing Hub, the Hearing Hub will automatically reconnect to the phone.
Normally, the first time a Bluetooth
pairing connection must be established. The pairing connection is only required for the
first use, and does not need to be repeated for subsequent usage.
Pairing instructions
See the "Pairing instructions" in Page 41.
If you have any questions about pairing or need assistance, ask your dispenser.
54
®
landline phone.
®
pairing procedure has been completed.
®
.
®
landline phone.
®
device is used with the Hearing Hub, a one-time
Advertisement
Table of Contents
