Haier HaierPhone L52 User Manual page 6

 Caution: risk of explosion if battery is replaced by an incorrect type.
 Dispose of used batteries according to the instructions.
 For pluggable equipment, the socket‐outlet shall be installed near the
equipment and shall be easily accessible.
 RADIO WAVES:
Proof of compliance with international standards (ICNIRP) or with
European Directive 1999/5/EC (R&TTE) is required of all mobile phone
models before they can be put on the market. The protection of the
health and safety for the user and any other person is an essential
requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not
to exceed the limits for exposure to radio waves (radio frequency
electromagnetic fields) recommended by international guidelines. The
guidelines were developed by an independent scientific organization
(ICNIRP) and include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2
W/kg(10g) for CE. The SAR limit set by the FCC is 1.6 W/kg(1g).
Tests for SAR are conducted using standard operating positions with the
device transmitting at its highest certified power level in all tested
frequency bands. The highest SAR values under the ICNIRP guidelines for
this device model are:
Maximum SAR for this model and conditions under which it was
recorded.
SAR Head
SAR Body
During use, the actual SAR values for this device are usually well below
the values stated above. This is because, for purposes of system
efficiency and to minimize interference on the network, the operating
power of your mobile device is automatically decreased when full power
0.497 W/kg(1g)
1.118 W/kg(1g)