Table of Contents
Advertisement
5-2 DCV, ACV Measurement
1)Connect BLACK test lead into " COM " terminal.
2)Connect RED test lead into " V Ω " terminal.
3)If measure " DCV ", select the " Function rotary switch "
( 3-4, Fig. 1 ) to the " V " position then push the
" FUNC. button " ( 3-7, Fig. 1 ) for display show "
4)If measure " ACV ", select the " Function rotary switch "
( 3-4, Fig. 1 ) to the " V " position then push the
" FUNC. button " ( 3-7, Fig. 1 ) for display show "
5)When LCD show the " AUTO " marker, the meter is
under the " auto range " mode. Meter will select the
suitable measurement range automatically.
6)Under the operation of " auto range " mode, push the
" Range button " ( 3-5 Fig. 1 ) will hold the range.
5-3 Resistance Measurement
1)Connect BLACK test lead into " COM " terminal.
2)Connect RED test lead into " Ω " terminal.
3)Select the " Function rotary switch " ( 3-4, Fig. 1 ) to
the " Ω " position then push the " FUNC. button "
( 3-7, Fig. 1 ) for display show " Ω ".
4)When LCD show the " AUTO " marker, the meter is
under the " auto range " mode., the meter will select the
suitable measurement range automatically.
5)Under the operation of " auto range " mode, push the
" Range button " ( 3-5 Fig. 1 ) will hold the range.
5-4 Continuity Check
1)Connect BLACK test lead into " COM" terminal.
2)Connect RED test lead into " V Ω " terminal.
3)Select the " Function rotary switch " ( 3-4, Fig. 1 ) to
8
".
".
Hide quick links:
Advertisement
Table of Contents
