Checking The Connection Status - Canon WFT-E1 Network Setup Manual

Checking the Connection Status

Check the connection status to the FTP server.
If you connect the WFT-E1 directly to the FTP server, make sure to use a cross
cable. If a straight cable is used, error No. 81 is displayed and you cannot transfer
images.
When using a straight cable, connect the FTP server and the WFT-E1 via a hub or a
router.
Connect the FTP server and the WFT-E1, and turn the power on.
Successful connection display
Failed connection display
The <3> lamp and the <4> lamp on the WFT-E1 will
light up, and the LCD panel will show the <C>.
After the period of time passes with no activity as set
in the [Power Saving] menu, the <4> lamp will turn
off and the <C> will also disappear from the LCD
panel.
The LCD panel will show <E> and an error number.
The < > and <3> lamps will also blink.
C
See troubleshooting (p.103) to solve the problem.
W
4
57