Transferring Images to the FTP Server
This section uses automatic transfer as an example to explain how to transfer images to
the FTP server.
If a memory card is not installed in the camera, images cannot be transferred. Images will
also be stored in the memory card, so insert a memory card with adequate available
space.
Select [Image transfer (LAN) settings]
1
from the menu.
[Image transfer (LAN) settings] will not appear
unless the WFT-E1 is connected to the camera,
and both are turned on.
Select [Automatic transfer].
2
Select [Enable].
3
Take a picture.
4
The <4> lamp will blink and captured image will be transferred to the FTP
server.
88