Canon WFT-E1 Network Setup Manual page 105

2 Is the correct IP address set for the DNS server in the WFT-E1?
Set the same IP address as for the DNS server to be used for the WFT-E1. (p.117
[Address])
DNS server
3 Is the DNS server's power on?
Turn the DNS server's power on.
4 Are the correct IP address and corresponding name set in the DNS server?
Set the correct IP address and corresponding name in the DNS server.
5 Is the DNS server functioning normally?
Check the settings of the DNS server to make sure if it's functioning normally as a
DNS server.
If there is a network administrator, ask that person to change the status of the DNS
server so it is available.
Overall network
6 Is a router or a similar device with a gateway function used on the network
you are trying to connect to?
If there is a network administrator, ask that person for the gateway address for the
network, and set it in the WFT-E1. (p.116 [Gateway])
Set the correct gateway address for all network devices including the WFT-E1.
23: Duplicate IP address
WFT-E1
1 Is a device connected to the same network as the WFT-E1 using the same IP
address as the WFT-E1?
Change the IP address for the WFT-E1 to avoid duplication of IP address with
another device connected to the same network. (p.116 [IP Address]) Or, change
the IP address for the device with the duplicate address.
If the WFT-E1 is set to use an IP address under a network environment using a
DHCP server, set the WFT-E1 to use the DHCP server. (p.116 [DHCP Server])
Troubleshooting
105