Change The Administrator Account - TP-Link Archer VR300 User Manual

Chapter 14
¾ To restore configuration settings
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2 Click Advanced
3 Click Browse to locate the previous backup configuration file, and click
4 Wait for the restoring and then the modem router will automatically reboot.
¾ To reset the modem router to factory default settings
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2 Click Advanced
3 Click Restore to restore all configuration settings to default values, except your
login and TP-Link ID information. Click
4 Wait for the reset process to complete, and then the modem router will automatically
reboot.
Note:
1. During the resetting process, do not turn off the modem router.
2. We strongly recommend you back up the current configuration settings before resetting the modem router.
14 4

Change the Administrator Account

Admin account is used to log in to the modem router's web management page. You are
required to set the admin account at first login. You can also change it on the web page.
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2 Go to Advanced
Management section.
> System Tools > Backup & Restore
> System Tools > Backup & Restore
> System Tools
page.
page.
Factory Restore to reset the modem router.
> Administration page. Locate the
Administrate Your Network
Restore.
Account
77