Use Ipsec Vpn To Access Your Home Network - TP-Link Archer VR300 User Manual

Chapter 12
12 1

Use IPSec VPN to Access Your Home Network

IPSec VPN is used to create a VPN connection between local and remote networks.
To use IPSec VPN, you should check that both local and remote routers support IPSec
VPN feature. Then, follow the steps below to set up an IPSec VPN connection.
1. The typical VPN topology is here. Site A refers to local network, and Site B refers to
the remote network that is to be connected. Record Site A and Site B's LAN and WAN
IP addresses before you start configuration.
Site A
Modem router 1
PC 1
2. Configuration on Site A (local network).
1 ) Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password
you set for the router.
2 ) Go to Advanced
WAN: 219.134.112.246
LAN: 192.168.1.1
Subnetmask: 255.255.255.0
> VPN > IPSec VPN, and click Add.
Modem Router 2
WAN: 219.134.112.247
LAN: 192.168.2.1
Subnetmask: 255.255.255.0
PC 2
VPN Server
Site B
50