Table of Contents
Advertisement
Chapter 14
Now, you can manage the modem router over both HTTP (http://tplinkmodem.net) and
HTTPS (https://tplinkmodem.net).
Note:
If you want that all local devices can manage the modem router, just leave the
14 6
Remote Management
By default, the remote devices are not allowed to manage the modem router from the
internet. You can enable remote management over HTTP and/or HTTPS if needed.
HTTPS is a more secure way to access the router.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management
feature because private addresses are not routed on the internet.
Follow the steps below to allow remote devices to manage the modem router over
HTTPS.
1
Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2
Go to
Advanced
Management
section.
3
Tick the check box to enable
via HTTPS
to allow for HTTPS connection. Keep the
4
Set the client device allowed for remote management. Select
devices to manage the modem router. If you just want to allow a specific device to
manage the modem router, select
IP/MAC address of the remote device.
5
Click Save.
>
System Tools
>
Remote
Management. Enable
Only the Following IP/MAC Address
Administrate Your Network
IP/MAC Address
Administration
page. Locate the
Port
as the default setting.
field blank.
Remote
Remote Management
All
to allow all remote
and enter the
79
Hide quick links:
Advertisement
Table of Contents
