Advertisement
3.3
Place the softener in the salt
bin; use the side with the round
opening (for correct installation,
see 3.4). To install the brine
valve,
open
pressing it gently at both sides.
Now put the brine valve in the
provided space, with the top
side up. Make sure that the
brine valve goes all the way
down to the bottom of the salt
bin. Make sure not to squeeze
the
tube;
Disconnect
reconnect correctly. Close the
cover.
3.4
The device can be installed in the container in three different ways:
at the back, to the left or to the right. The support at the bottom of
the container must be placed accordingly. Please refer to the figures
on the following page.
DELTA WATER ENGINEERING
the
cover
avoid
kinks.
if
necessary,
and
by
V05/2009/P5
Advertisement
