Advertisement
3.2.3
Connect the brine valve (#5) to the softener by means of a Ø4mm
flexible tube. Insert the tube as far as possible (to stop) into the
quick-release couplings. Make sure not to squeeze the tube; avoid
kinks.
Make sure to install the supplied overflow tap. First, pierce a hole
(Ø21mm) in the side wall of the salt bin. The location of the hole is not
important, make sure however that it is approx. 10cm down from the top
edge of the salt bin. Once the hole has been drilled, mount the overflow
tap and secure it with the supplied nut. After drilling, remove all bits of
plastic that have fallen into the salt bin. A separate instruction leaflet with
detailed information has been added to the device.
DELTA WATER ENGINEERING
V05/2009/P4
Advertisement
