Advertisement
2. Precautions:
Make sure you have all necessary tools on hand before you begin
with the installation.
Follow all local legal regulations.
Read this manual carefully. If you have any questions or
remarks, please contact your Delta supplier.
Check incoming pressure: minimum 1 bar (dynamic), maximum 8
bar (static) (15 PSI- 116 PSI). If necessary reduce incoming
pressure.
Do not install the Delta Softener close to a heating source
(environment temperature must be below 50°C).
Protect softener and drain (12) against frost.
Make sure you have the latest installation manual at hand. Check
with your Delta supplier.
3. Installation:
3.1
Close main valve and make sure pressure is released from piping.
This can be done by opening at least one tap.
3.2
Cut open main water supply in order to install direct connections to
the Delta Softener or to install the Delta Bypass (recommended).
Follow the arrows on both Bypass and softener for water inlet and
outlet.
Pay attention that the inlet filter doesn't fall out.
3.2.1
with Delta Bypass
The Delta Bypass has a ¾" connection. The direct connections on
the water softener are available in ½", ¾" and 1".
DELTA WATER ENGINEERING
with direct connections
V05/2009/P2
Advertisement
