Advanced Playback - Hitachi HBD316 User Manual

IMPORTANT NOTE:
THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO BLU-RAY DISCS. IF OTHER DISC FORMATS
ARE PLAYED, SCREEN DISPLAY AND OPERATION WILL BE DIFFERENT.
OSD
Press this button and the screen will display some
information about disc, such as : " Type of Disc ",
"current chapter " , " Total of chapters " , "Current
playd time in title" , " Audio " , " Subtitle " and so on.
A-B
Press " A-B " to begin start-point after two seconds,
press again to set an end point and complete
setting. The selected section A-B will be repeated.
The third press will cancel this function.
Note: this key is invalid to Blu-ray Disc Java.
REPEAT
Press one or more times to select a repeat mode.
Follow this operation :
Repeat Chapter
Repeat Title
Repeat All
Repeat Off
Press this button repeatedly to display circular the
above operation.
Note:
1. This key is not effect for BD-JAVA disc.
2. Some of the BD discs can not support "Repeat All"
mode.
SEARCH
During playback, press this button and ENTER button,
you can use CURSOR to select a search mode, then
press digits button. ENTER key on the remote to
confirm your selection, could choose the point that
you want to play. Press SEARCH button will cancel
search.
Note: For some discs, the TITLE could not be chosen
in search mode.
CLEAR
This button can cancel the mistake information you
input.
DISC MENU
During DVD/Blu-ray Disc playback, press this button
will return a disc menu, then press ENTER button
to play.

ADVANCED PLAYBACK

POPUP MENU/TITLE MENU
During DVD/Blu-ray Disc playback, press POPUP
MENU /TITLE MENU .
To open the pop-up menu opens.
1. Press LEFT/RIGHT /UP/DOWN
an option, then press ENTER.
2. Press RETURN to close the menu.
HOME
Press this button and the screen will display the
HOME menu.
Note: The HOME menu will display on the screen
automatically, under No Disc or Stop situations.
RETURN
Within the Home menu, Press this button to return to
the previous menu.
RESOLUTION
This sets the video output resolution: Auto, 1080p,
1080i, 720p, 480p and 480i.
Note:
Setting a resolution your TV cannot support could
result in an unstable picture or a loss of picture. Check
your TV manual for guidance.
This function key will be effective only on HOME mune
interface.
ANGLE
During playback, press this button to change the
angleof the picture. This screen will display
X/X " th e first "X" indicates the current number of
angle; the second "X" indicates total number of angle
Note: the angle function will not work if your disc
does not contain the multiple angle features.
ZOOM
Press to zoom in on a video. Each time you press
this button, the magnification level changes.
Note: this key is invalid to Blu-ray Disc Java.
11
buttons to select
" Angle:
.