Table of Contents
Advertisement
Basic playback
1. Press STANDBY/ON button on the front panel or
the remote, your player turns on.
2. Turn on the TV, then select the input setting on the
TV that matches the connection method you used to
connect your player.
3. Press OPEN/CLOSE
to open the disc tray.
4. Place a disc on the disc tray with the label facing
up, then press OPEN/CLOSE
tray. It may take a few seconds for the disc to load.
5. If the disc does not start playing automatically,
press PLAY .
6. If a Blu-ray Disc or DVD menu opens, press
CURSOR button to select , then press ENTER.
7. To eject the disc, press OPEN/CLOSE
Fast forward and Fast reverse
1. Press F.FWD
to fast forward through the disc.
Each time the F.FWD
button is pressed, the
fast forward motion speed changes. The speed will
increase through the following sequence:
2,
3,
4,
5.
2. Press PLAY to resume normal playback.
3. Press F.REV
to fast reverse through the disc.
Each time the F.REV
button is pressed, the
fast reverse motion speed changes. The speed will
increase through the following sequence:
2,
3,
4,
5.
4. Press PLAY to resume normal playback.
Previous and Next
During normal playing, press PREV
to the
start of the chapter/track; Press PREV
can
back to the previous of the chapter/track
playback.
Each press of NEXT
key
during playing will
forward to next chapter/track playback.
DIGITS BUTTONS
In playback mode, press SEARCH
then press the number buttons to enter a title, chapter,
track, or time.
In menu mode, press to enter numbers.
Stop playback
1. Press STOP
to close the disc
screen will show the start logo. As some disc the
player can recall the location where stopped, such
as BD.
2. Press PLAY to playback to resume playback from
the location where playback is stopped or from the
beginning of the disc.
.
3. Press STOP twice to stop completely.
Note: Not all Blu-ray Discs support the resume feature.
The resume information is saved even when the power
is turned off.
Pause playback
1. Press PAUSE
1,
will be muted .
2. Press PAUSE or PLAY to resume normal playback.
Step forward
1. When playing DVD/MPEG4/WMV9/MKV/BD
Disc, press Step forward to enter Single-step state.
1,
2. Press PLAY key to resume normal play.
UP/DOWN/LEFT/RIGHT
When a menu is open, press to highlight an item, then
press ENTER.
When viewing a picture(JPEG file),press to rotate the
once can back
picture.
twice
NOTES:
1.
jump
10
BASIC PLAYBACK
and ENTER button
button to go to stop mode, the TV
to pause playback . The sound
,
Advertisement
Table of Contents
