Connecting to your Home Network
This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal
Connect the player's LAN port to the corresponding
port on your Modem or Router using a commercially
available LAN or Ethernet cable (CAT5 or better with
RJ45 connector).In the example configuration for
wired connection below, this player would be able to
access content from either of the PC.
VIDEO OUT / AUDIO OUT
Using a wired network provides the best performance,
because the attached devices connect directly to the
network and are not subject to radio frequency
When plugging or unplugging the LAN cable, hold
the plug portion of the cable. When unplugging, do
not pull on the LAN cable but unplug while pressing
down on the lock.
Do not connect a modular phone cable to the LAN
Since there are various connection configurations,
please follow the specifications of your telecomm-
unication carrier or internet service provider.
Another connection option is to use an Access Point
or an wireless router. In the example configuration for
wireless connection below, this player would be able
to access content from either of the PC.
The network configuration and connection method
may vary depending on the equipment in use and
the network environment. This player is equipped
with an IEEE 802.11n wireless module, which also
supports the 802.11b/g standards. For the best
wireless performance, we recommend using a
IEEE 802.11n certified Wi-Fi network (access point
or wireless router).