Powerware 3115 User Manual page 11

Test/Alarm Reset Button
Powerware 3115 User's Guide
®
5. Start the UPS by pressing the
The Power On indicator illuminates indicating that power is
available from the rear receptacles.
On/Off Button
Figure 2. Powerware 3115 Front Panel
The UPS conducts a self-test and enters Normal mode. If the
alarm beeps, consult "Troubleshooting" on page 23.
NOTE The UPS charges to 90% in approximately 12 hours. However, it is
recommended that the UPS charge for 24 hours after installation or long storage.
www.powerware.com
S
button as shown in Figure 2.
Power On Indicator
Installation
5