Advertisement
Features and Benefits
● Stud/Metal/AC wire detection
● Wood, metal and live wire detection-detects wood up to 3/4" depth
● Locate with audio LCD indication
● Normal scan 3/4" & deep scan 1-1/2" selection
● 180" pivoting laser plane with level and plumb vials
● LCD sensing and mode display with new target graphics
● LED display with continuous live wire detection
● 20 foot laser line projection
● Thumb dial adjustable feet for leveling the laser
● Vertical and horizontal mounting holes
● Easy key pad operation
● Ergonomically designed for comfort and grip
● Auto power off
● Low battery indication
SAFETY INSTRUCTIONS:
Failure to follow warnings may result in bodily injury.
The following warnings must be followed to avoid injury:
• DO NOT remove warning labels.
• DO NOT use optical tools such as a transit to
view laser beam. Serious eye injury could result.
• DO NOT project the laser beam directly into the
eyes of others.
• DO NOT stare directly at the laser beam.
• DO NOT project laser beam onto a reflective
surface.
• DO NOT operate around children, or allow
children to operate.
• DO NOT disassemble the laser.
• Always turn off laser when the tool is not in use.
Uon
IMPORTANT:
Read all instructions prior to operating the unit and DO NOT remove any labels from the tool.
The unit produces a straight line on the same surface on which the tool is placed. Any reflection of the line on
another surface should be considered reference.
Introduction
The unit uses electronic signals to locate the position of studs, joists or live AC wires through dry wall and
other common wall materials. Once the edge of the stud has been detected,
the unit LCD display gives visual and audio indications that allow you to easily pinpoint the stud's edge
position. A pencil line allows you to quickly note the location of the stud edges.
The unit generates a laser plane vertically and pivoting 90 degree clockwise or counterclockwise to
generate a laser straight line.
The unit allows the user to locate wood and metal studs up to 3/4 inch for metal and wood stud.
The unit provides automatic calibration for metal and wood stud modes, auto shut off and heavy duty
ABS construction.
Detection mode is selected by keypad function – metal and wood stud. Default mode is wood stud
detection. Mode should be selected before "on" key is pressed.
2
www.tmatlantic.com
Advertisement
