Recalibration And Information; Full Two-Year Warranty - Philips DL8760 Manual

4 When the measurement is finalized, the cuff
deflates and the measurement results are
shown on the display (Fig. 16). To transmit the
measurement results to the app, see section
'Transmit and store personal health data in the
app'.
Note: If you experience discomfort during a
measurement, such as pain in the arm or other
complaints, press the 'on' button to release the
air immediately from the cuff. Loosen the cuff
and remove it from your arm.
5 Press the 'on' button to switch off the device.
Note: after 1 minute, the device will turn off
automatically
If, after finishing the first measurement, another
measurement is required, press the user ID button
to select the correct user profile and follow steps
2-7.
Note: Wait at least 3 minutes between
measurements. This allows your blood circulation
to recover.
The device can store results of 60 blood pressure
measurements for both user 1 and 2.
Transmit and store personal health data
in the app
Note: Your personal measurement data is only
stored and displayed in the Philips HealthSuite
health app.
1 Activate the Philips HealthSuite health app and
Bluetooth on your mobile device directly after a
measurement.
-
Keep the mobile device and the blood
pressure monitor at transmission distance
(no more than 16 feet (5 meters) from each
other, in the same room).
2 Once successfully connected, the measurement
results are being transmitted to the health app
and the Bluetooth symbol lights up.
- If the data transmission is successful, the
measurement results are displayed in
the health app.
- If the data transmission fails, the Bluetooth
symbol together with 'Err' is shown. The
pending measurement data will be transmitted
to your mobile device the next time it connects
with your blood pressure monitor. You can also
try to resend the data:
-
Activate the health app on your mobile
device.
-
Press the user ID button or 'on' button to
switch on the blood pressure monitor.
-
The measurement results will be
automatically sent to your mobile device if
the device has been added in the app.
-
When the blood pressure monitor connects
via Bluetooth to the app of a user, the
device will automatically select that user and
measurements can only be done for that
user.
Cleaning and storage
Caution: This device is not washable. Never
immerse the device in water and do not rinse it
under running water.
Caution: Avoid sudden movements and hard
contacts with objects.
Caution: Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the device.
1 Switch off the device and unplug the DC
charger from the electrical outlet.
2 Use a slightly damp or dry cloth to wipe the
surface of the display (Fig. 17).
3 Store the device in a cool, dry, and ventilated
environment where it will not be crushed,
banged or subject to damage. For further
information, please refer to the transport and
storage specifications (see 'Specifications').
4 Do not wrap the power cord around the device
when you store it.
This device has no other user-serviceable parts.
For assistance call 1-844-531-6861.
Accessories
Philips accessories may be purchased at a store
near you, or on our website
www.philips.com/store.
Disposal
This device contains a rechargeable battery which
must be disposed of properly. Contact your local
town or city officials for battery disposal
information. You can also call 1-800-8-BATTERY
or visit www.rbrc.com for battery drop-off
locations.
For assistance, visit our website
www.philips.com/support or call 1-844-531-6861
toll free.

Recalibration and information

This device is calibrated at the time of
manufacture. If this blood pressure monitor is used
according to instructions, recalibration will not be
needed for 5 years (10000 use cycles).
Recalibration can be carried out by an appropriate
authority or authorized service center. This
calibration will be charged for by said authority.
If you need more information about the app,
please visit www.philips.com/healthprograms
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-844-531-6861

Full Two-Year Warranty

Philips Electronics North America Corporation
warrants each new Philips product, model DL8760,
against defects in materials or workmanship for a
period of two years from the date of purchase and
agrees to repair or replace any defective product
without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or abuse,
lack of reasonable care, the affixing of any
attachment not provided with the product or loss