Direction Indicators - Alfa Romeo Giulia 952 2017 Owner's Handbook Manual

DIRECTION INDICATORS

The direction indicators could assume
two different flashing strategies:
continuous or temporary (Lane Change).
To activate the continuous flashing
function, move the left lever fig. 49 until
end of stroke (unstable):
upwards: activates the right direction
indicator;
downwards: activates the left
direction indicator.
The or warning light will blink on
the instrument panel.
The direction indicators turn of
automatically when the car is brought
back onto a straight course or by moving
the lever in the opposite direction until
the first click (about half way).
"Lane Change" function
When you want to signal a lane change,
move the lever until the first impulse
(about half stroke).
The direction indicator on the selected
side flashes three times and then
switches off automatically. To turn of the
flashing before the end of the cycle,
move the lever in the opposite direction
until the first click (about half way).
SBL FUNCTION (Static Bending Light)
(where provided)
The SBL LEDs activate in order to better
illuminate the street and increase the
light angle while turning. This functione is
enabled by rotating the light switch to
42
position or AUTO. The SBL LEDs
activate if the speed exceeds 12.4 mph
(20 km/h) and the steering radius is
below 0.3 mi (500 m).
HEADLIGHT ALIGNMENT ADJUSTMENT
Light beam direction
The correct aiming of the headlights is
important for the comfort and safety of
not only the driver but all other road
users. This is also covered by a specific
rule of the highway code.
The headlights must be correctly aligned
to guarantee the best visibility conditions
for all drivers while travelling with
headlights on.
Contact a Alfa Romeo Dealership to have
the headlights checked and adjusted, if
necessary.
On vehicles equipped with manual
headlight alignment adjuster, check light
beam alignment every time the load or its
distribution changes.
Headlight alignment corrector
(where provided)
This device is not available on vehicles
equipped with Xenon headlights
(Bi-Xenon 35 W headlamp version), as
they require an automatic alignment
correction system.
It only operates with the ignition device
at ON.
50
To adjust rotate ring nut 5 fig. 50.
Position 0: one or two people on the
front seats;
Position 1: 4 or 5 passengers
Position 2: 4 or 5 passengers + load in
the luggage compartment
Position 3: driver + maximum
admissible load stowed only in the
luggage compartment
IMPORTANT Check the headlight
alignment each time the weight of the
load transported changes.
FOG LIGHTS ALIGNMENT
(where provided)
Contact a Alfa Romeo Dealership to have
the headlights checked and adjusted, if
necessary.
04126S0006EM