Table of Contents
Advertisement
in the event of unintentional exiting of
the lane (direction indicator not
activated) to the left, fig. 189
189
When the system detects that the vehicle
has approached the lane line and is about
to pass it, the left line on the display
lights up in yellow, fig. 190.
190
The system operates in the same way,
but mirrored, in the event of exiting the
174
right lane when only the right lane limit
has been detected.
Exiting a lane with detection of both
limits
When the system is active, the lane lines
on the display become white to indicate
the successful detection of the limits,
fig. 191.
07226S0003EM
191
The system is ready to provide
indications in case it is accidentally
abandoned (direction indicator not
engaged).
In accordance with the different
conditions detected, the system can
attract the attention of the driver by
altering the lines that identify the lanes
on the display. In particular, the system
can alter their colour (from white to
07226S0004EM
yellow and vice versa), increase their
thickness, fig. 192
192
If a line is crossed, it is signalled by an
acoustic signal as well. The signal is
emitted from the loudspeakers on the
side of the lane limit which is being
crossed (eg. if the vehicle is exceeding
the left line of the lane, the acoustic
signal will come from the loudspeakers
on the left).
07226S0005EM
Changing the system settings
The system's sensitivity can be set via
the Connect system.
To access the function, on the main menu
select the following items in sequence:
"Settings", "Safety", "Lane Departure
Warning" and "Sensitivity". The possible
options are:
High;
Low.
System limited operation signal
54) 55)
If the dedicated message is shown on the
display, a condition limiting the system
07226S0006EM
Advertisement
Chapters
Table of Contents
