Table of Contents
Advertisement
NOTE Pressing any button on the seat
memory or control panel will immediately
interrupt the automatic positioning
function (antipanic function). The
operation must be repeated to complete
the function.
FRONT SEAT ELECTRIC HEATING
(where provided)
With ignition device at ON, press buttons
fig. 34 on the dashboard.
34
You can select three heating levels:
"minimum heating": one orange LED lit
on the buttons;
"average heating": two orange LEDs lit
on the buttons.
"maximum heating": three orange
LEDs lit on the buttons.
Press the buttons for a few seconds to
activate the "fast maximum heating"
function.
After selecting one heating level, you
need to wait for a few minutes until warm
air flows into the compartment.
When the "maximum heating" setting is
selected, the heater produces a boosted
heat level for the first minutes of
operation. After this, the heat lowers to
reach the normal temperature level for
the selected function.
The same "minimum heating" setting is
automatically deactivated once a certain
period of time has elapsed. This varies on
a case-by-case basis, in accordance with
the specific operating conditions.
IMPORTANT To preserve the battery
charge, this function cannot be activated
when the engine is off.
REAR SEATS
The rear seats allow for:
Quadrifoglio version - two passengers;
04066S0004EM
35
other versions - three passengers
36
The seats and the seatbelts are
considered as components of the
protection system for the vehicle's
occupants.
11)
IMPORTANT Refer to the "Passenger
protection systems" chapter in the
"Safety" chapter for the positioning of
the seatbelts.
04066S0006EM
04066S0005EM
33
Advertisement
Chapters
Table of Contents
