Alfa Romeo Giulia 952 2017 Owner's Handbook Manual page 36

SPLIT FOLDING REAR SEAT
(where provided)
The luggage compartment can be
partially (1/3 or 2/3) or totally extended
by splitting the rear seat.
37
Partial extension of the luggage
compartment (1/3 or 2/3)
Extending the right side of the luggage
compartment allows you to carry two
passengers on the left part of the rear
seat, while extending the left side allows
you to carry one passenger.
Proceed as follows:
completely lower the rear seat head
restraints;
place the seat belt so that it doesn't
impede the movement of the backrest
while tilting it;
operate lever 1 fig. 38 to tilt the left
part or lever 2 to tilt the right part of the
backrest: it will automatically tilt
forward. If necessary, accompany the
34
backrest during the initial stage of tilting.
38
Full expansion of the luggage
compartment
Tilting the rear seat completely forwards
04066S0016EM
allows maximum loading volume.
Proceed as follows:
completely lower the rear seat head
restraints;
place the seatbelts so that they don't
impede the movement of the backrest
while tilting it;
use levers 1 and 2 to fold down the
backrests: these will fold down forwards
automatically. If necessary, accompany
the backrests during the initial stage of
tilting.
Repositioning the backrests
Move the seatbelts to the side, making
sure that they are correctly extended and
not twisted and that they are not trapped
behind the backrests of the seats, then
lift the backrests pushing them back until
you hear the locking click on both
attachment mechanisms.
12)
Central backrest section tilting
Before tilting the backrest, make sure
that the rear central seat belt is not
fastened and that there are no objects in
the central part of the cushion (if there
are any, remove them).
Using the fig. 39 strap, release the
central part of the backrest from its
04066S0007EM
housing and tilt it using the head
restraint.
39
Central backrest section repositioning
Using the head restraint, lift the central
portion upwards, accompanying it during
its movement, lightly press to make sure
that it is properly attached. Make sure
that the armrest is properly attached by
trying to move it, if it is not attached,
repeat the operation.
04066S0008EM