Base Stations Tab - Orion HT500 RBS User Manual

Chapter 5

5.4 Base Stations Tab

The Base Stations Tab (Figure 5.4.0) is used to add HT500 Base Stations to the Confi guration Database so
they can be added to Communication Groups.
Base Stations are added to the database the same way Communication Groups and Javelin units are added; by
simply selecting <new> in the Base Stations column to the left, and then typing an ID in the HT500 Radio
Base Station fi eld.
Note: Base Stations will only communicate with Javelin units that are assigned to the same group and
loaded in the Base Station Use the Remotes in Group and Remotes in Base area to view the Javelin
units assigned to the same group and load them into the Base Station. Please see Section 6.3 for more
detailed information on the Confi guration Database.
Users must select Commit Changes for the changes to be applied to the Base Station.
Import Database: It is possible to import other databases that include various Javelin devices, HT500 RBS
devices and pre confi gured groups. This is especially useful when transferring Group information to other
operators of HT500 RBS devices.
Note: After selecting the fi le to import, a warning dialog will display: "The Database import will add new
information to the database but will not overwrite any existing settings." The import function appends the
information that is different, but doesn't change anything already in the settings.
Export Database: It is possible to export the database that includes various Javelin devices, HT500 RBS
devices and pre confi gured Groups. This is especially useful when transferring Group information to other
operators of HT500 RBS devices.
Close: The Close button will close the Confi guration Database window and the HASP from which it was
opened will be displayed.
16
Figure 5.4.0
Orion Electronics Limited
Confi guration Database
075-2000-30 rev 1.5