Table of Contents
Advertisement
Chapter 5
Confi guration Database
5.3 Javelin Units Tab
The Javelin Units Tab (Figure 5.3.0) is used to add HT550 Javelins to the Confi guration Database so they
can be added to Communication Groups.
Figure 5.3.0
Figure 5.3.1 displays the Javelin Units portion of the Confi guration Database. Use this window to add
Javelin units to the database so that they may be confi gured to communicate with certain Base Stations.
Figure 5.3.1
Javelin units are added to the database the same way Communication Groups are added; by simply selecting
<new> in the Javelins column to the left, and then typing an ID in the HT550 Remote Unit ID fi eld. (The
Javelin ID is always the Serial Number of the device.)
Assigned to Group
After the new Javelin unit has been added, users will need to assign the unit to a group. In the
Communications Group section, select the down arrow next to Assigned to Group. All the groups that
were set up in the Communication Groups dialog will appear in this drop down list. Select the group that the
Javelin is to belong to.
Display Characteristics
The Display Characteristics section of the Javelin units dialog allows users to name the Javelin device and
select an icon for use during real time tracking. Names must be no longer then 12 alpha numeric characters.
The Symbol and Color dialog allows users to choose exactly how the target will appear in the mapping
software. Scroll down either list to make the desired selections, and select OK when complete. A sample of
the target chosen will show to the right of the dialog (Figure 5.3.2).
Figure 5.3.2
Once the unit details have been entered, select the Commit Changes button to apply the settings. If the
device in question is not currently connected to the computer, the changes will be applied the next time the
Javelin unit is connected.
075-2000-30 rev 1.5
Orion Electronics Limited
15
Hide quick links:
Advertisement
Table of Contents
