5.2.6.1. Sensors
5.2.6.1.1. Sensor No.
Each sensor is pre-numbered, 1 through 4.
5.2.6.1.2. Type
Sensors are relay inputs, and must be designated as either 'Normally Open' or
'Normally Closed'. This setting will be determined by the type of device that is
sending the signal to the Brans200 sensor input.
5.2.6.2. Motion Detection
For each channel, indicate the sensitivity level (1=Low, 100=High).
Click the Preview button beneath each channel to check for proper detection of motion.
Click the Return button to go back to the previous screen.
Brans200/200E rev. 1A
- 32 -
Jan 2003