Table of Contents
Advertisement
5.2.2 Video Setup
5.2.2.1. Video Channel Control
Use to set up the channels to view, their image quality, image resolution and camera titling.
5.2.2.1.1. Enable
Each channel you want view must be enabled. Click in the Enable box (a ✓ will appear)
for each channel you are going to view.
5.2.2.1.2. Quality
Choose from: Lowest Low Normal High Highest
The higher the quality setting, the higher the quality of the video, but you will experience
lower compression and slower transmission because of the larger file size.
5.2.2.1.3. Resolution
Choose from: 160x120 160x240 320x240 640x240 640x480
Higher resolutions create larger file sizes requiring longer (slower) transmission times.
5.2.2.1.4. Title
Enter the title for each camera into this box, up to 255 characters in length.
5.2.2.2. Color Control
The user can manually adjust the color values of the video from their input sources for each
channel by adjusting the values in Brightness, Hue, Saturation and Contrast. Click the
corresponding Default button to reset a channel to its base values.
5.2.2.3. Encoding Frame Rate
Sets the recording frame rate per camera. Select 1, 2, 4, 8, 12, 16, 20, 24, 28, 30 from the drop-
down box.
Brans200/200E rev. 1A
- 23 -
Jan 2003
Advertisement
Table of Contents
