Table of Contents
Advertisement
5
.
S
e
t
u
p
5
.
S
e
t
u
p
5.1 Connect to Administration Page
Connect to the Administration page to modify any of the Brans200 settings. All settings are done within
the web browser interface and can be done from any PC with Internet access.
You can connect to the Administration Page one of two ways:
Press the Admin button
from the User interface and enter the proper ID and Password.
-or-
Enter the direct page address into the browser URL box, e.g. http://(IP address)/cgi-bin/admin.cgi.
You are then presented with the Administrator Login page:
Default ID is "admin" and default Password is "pass" when shipped from the factory. It is recommended
that you change the ID and Password after first login to maintain your system security and integrity.
Brans200/200E rev. 1A
- 20 -
Jan 2003
Advertisement
Table of Contents
