5.2.2.4. SAVE
Click the Save button to save all your video and color settings.
5.2.3 Audio Setup
Audio Settings
Audio setup is divided into two sections: one-way audio (Server->Client) and two-way
interactive audio (Server<->Client).
5.2.3.1 Audio (Server -> Client)
5.2.3.1.1 Enable
Audio must be enabled to function. If you are going to use audio, click in the Enable box
(a ✓ will appear).
5.2.3.1.2. Input Source
Choose which input jack the audio will come into the Brans200. Click the appropriate
radio button. Audio 'IN 1' is for one-way audio.
5.2.3.1.3. Related Video Channels
Click in the box (a ✓ will appear) next to each video channel that is related to the audio
input. You can hear audio only when the related video channel(s) is displayed in the Live
view screen.
5.2.3.2. Interactive audio (Serve <-> Client)
5.2.3.2.1. Enable
Interactive audio must be enabled to function. If you are going to use interactive audio,
click in the Enable box (a ✓ will appear).
5.2.3.2.2 Mode
Click the radio button of the appropriate communications device: speaker or interphone.
If two-way communication will be through a speaker-microphone, connect it to the Audio
'OUT' connector on the rear panel of the Brans200.
If two-way communication will be through an interphone, connect it to both the Audio
'OUT' connector and the Audio 'IN 2' connector on the rear panel of the Brans200.
Brans200/200E rev. 1A
- 24 -
Jan 2003