emz smart Sol Operating Instructions Manual page 73

1.3.8 Increase retu...
Activation
T ON
T OFF
T min
04. 07. 2015
1.3.10 Post Heatin...
Hysteresis
Time block 1
Time block 2
Time block 3
Time block 4
04. 07. 2015
1.4 Efficiency funct...
Disable recharge
04. 07. 2015
›1.3.8 Increase retu...‹ appears.
Parameters for return flow temperature
8.0K
increase can be defined here.
4.0K
Ask a fitter before making
changes at this point.
15.0°C
Return to ›1.3 Basic functions‹.
Continue with ›Post Heating Request‹.
10:27
›1.3.10 Post Heatin...‹ appears.
10.0K
The reheating control reacts to the values of
the top tank sensor. If the temperature falls
below ›t charge‹ minus the hysteresis, the
control activates the reheating cycle via the
heating boiler. When the set value is reached
the reheating cycle is stopped.
Return to ›1 Main menu‹.
Continue with ›Efficiency functions‹.
10:27
›1.4 Efficiency funct...‹ appears.
Another selection level appears.
Once the first subitem
›disable recharge‹ is selected, ...
10:28
OPERATION MODE Page 73