Download Print this page

Opening The Lid - Electrolux EWT 0862EWW User Manual

Hide thumbs

Advertisement

Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.

10.9 Opening the lid

While a programme or the delay start
operates, the appliance lid is locked. The
indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the lid.
Open the lid during the first 10
minutes of the cycle and when the
delay start operates:
1. Press the
to pause the appliance.
2. Wait until the lid lock indicator
goes off.
3. You can open the lid.
4. Close the lid and press the
The programme (or the delay start)
continues.
Open the lid when the programme
operates:
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance lid.
3. Close the lid and set the programme
again.
10.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• The indicator of the button
off.
• The lid lock indicator
• The indicator
• You can open the lid.
again.
goes
goes off.
is on.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
• Keep the lid ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent
the creases in the laundry.
• The lid lock indicator
indicator
flashes. The lid stays
locked.
• You must drain the water to open the
lid.
To drain the water:
1. If necessary, decrease the spin
speed. If you set
only drains.
2. Press
. The appliance drains the
water and spins.
3. When the programme is completed
and the lid lock indicator
off, you can open the lid.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and
spins automatically after
approximately 18 hours
(except for Wool
programme).
10.11 Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
• All indicators go off.
• The indicator of the
slowly .
• Press one of the options to deactivate
the energy saving status.
ENGLISH
13
is on. The
, the appliance
goes
flashes

Advertisement

loading

  Related Manuals for Electrolux EWT 0862EWW