Electrolux EWT 0862EWW User Manual page 12

12 www.electrolux.com
Always obey the instructions that you find on the packaging of the
detergent products.
10.4 Setting a programme
1. Turn the programme knob and set
the programme:
• The indicator of the
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the indicator
flashes red.
10.5 Starting a programme
without the delay start
Press the
• The indicator of the
flash and stays on.
• The programme starts, the lid
locks, the indicator
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
10.6 Starting a programme with
the delay start
1. Press
set.
The indicator of the set delay is on. The
indicator
2. Press
• The appliance starts the
countdown.
Detergent compartment for prewash phase.
Detergent compartment for washing phase.
Compartment for liquid additives (fabric conditioner, starch).
The mark is the maximum level for the quantity liquid additives.
M
flashes.
.
stops to
is on.
to set the delay you want to
is on.
:
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
To cancel the delay start :
a. Press to set the appliance to
pause
b. Press until the indicator of the
set delay goes off.
Press again to start the
programme immediately.
10.7 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press again.
The programme continues.
10.8 Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
.