Unpacking; Disposal Of Packaging Materials; Handling And Operation - Silvercrest 274455 Operating Instructions Manual

Unpacking

♦ Remove all parts of the appliance and the operating instructions from the
box.
♦ Remove all packaging material.
♦ Remove the silicone sleeves which can be found over the two spacers on the
side of the basket q.
♦ Remove the protective fi lm from the control panel.

Disposal of packaging materials

The packaging protects the device from damage during transport. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the device's original packaging during the warranty period
so that the device can be packed properly for return shipment in the event
of a warranty claim.

Handling and operation

This section provides you with important information on handling and using the
device.
NOTE
► This appliance operates with so-called "heating cycles". While the
appliance is heating, the halogen heating element 6 works and the
light in the appliance switches on. Once the appliance reaches the set
temperature, the halogen heating element 6 switches off . The light
goes out. As soon as the temperature falls below the set temperature,
the halogen heating element 6 and the light turn on again.
Accordingly, if the light turns on and off during use this is normal and
not an appliance malfunction!
■ 10 │ GB │ IE SHOM 1000 A1