Media Converter Module - On-Board - Omnitron Systems Technology 6550-0-FK User Manual

Replacement kit fast ethernet switch with 5 10/100 utp ports and 1 100base-fx fiber port

Hide thumbs

Table Of Contents

Table of Contents

10/100 speed and duplex mode of a mating Auto-Negotiating device

connected to its UTP port.

When the UTP "AN/Man" DIP-Switch is in the "Man" position, the converter

does not auto-Negotiate and operates in the mode selected by the Full/Half

Duplex "FDX/HDX" and "10/100" DIP-Switches.

UTP 10/100 "10 / 100" DIP-Switch

When the UTP "AN/Man" DIP-Switch is in the "Man" position, the UTP

"10/100" DIP-Switch selects the speed of the UTP port. When in the

"100" position (factory default), the UTP port operates at 100 Mbps. When

in the "10" position the UTP port operates at 10 Mbps.

UTP Full/Half-Duplex "FDX / HDX" DIP-Switch

When the UTP "AN/Man" DIP-Switch is in the "Man" position, the "FDX/HDX"

DIP-Switch selects the duplex mode of the UTP port. When in the "FDX" position

(factory default), the UTP port operates in Full-Duplex mode. When in the

"HDX" position, the UTP port operates in Half-Duplex. Set the duplex mode

to match the connecting device and check for link status.

Note: Attaching an Auto-Negotiating UTP port of the 6550-FK to a device

with a manual/forced /hard-coded UTP port may result in an unpredictable

port setting with excessive collisions and poor link performance. When

operating in Manual mode, both mating ports MUST be set manually to the

same speed and duplex mode.

3.3.3