Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Omnitron Systems Technology FlexSwitch 600X
Summary of Contents for Omnitron Systems Technology FlexSwitch 600X
- Page 1 Omnitron Systems Technology, Inc. Omnitron Systems Technology, Inc. FlexSwitch 600X 16/24 Port 10/100 Auto-Sensing Dual Speed Ethernet Switch User’s Manual 27 Mauchly #201, Irvine, CA 92618 (949) 250-6510 Fax: (949) 250-6514 Document #040-06000-002...
-
Page 2: Technical Support
Omnitron Systems Technology, Inc. Omnitron Systems Technology, Inc. Omnitron Systems Technology, Inc. SAFETY CONSIDERATIONS TECHNICAL SUPPORT For assitance in installing this product, contact Omnitron’s Technical Support Warning Department. The operating description in this Instruction Manual is for use by qualified personnel only. To... -
Page 3: General Description
(D) and stations (C) is capable of reaching distances of up to 58 km (36 mi.). GENERAL DESCRIPTION FlexSwitch 600X The FlexSwitch 600X is a family of 16/24 port dual speed 10/100 workgroup Ethernet 24@10/100 100 Mbps Hub switches. They feature an optional interface module that can be used to connect to other switches, hubs or workstations via multimode or single-mode fiber or provide additional 10/100 UTP copper ports. -
Page 4: Controls And Indicators
Yellow / ON Power applied variety of Fast Ethernet and legacy Ethernet workstations are connected to file servers Per-Port LEDs Display via fiber. In this example, 24-port FlexSwitch 600X switches (B) are used to connect Function Color/State Description the workgroup stations (D). The workgroup switches are connected via fiber to the 6-... - Page 5 The FlexSwitch 600X has the ability to force ports to a particular speed (10 or 100 hub or a switch. Mbps) or duplex (half/full-duplex) through the use of a serial interface. The serial interface is located on the rear of the FlexSwitch 600X and has the ability to configure all ports Position Description on the chassis via ASCII terminal or terminal emulator.
-
Page 6: Site Preparation
9/125 micron single-mode fiber. Mbps) or duplex (half/full-duplex) through the use of switches. These switches are located on the rear of the FlexSwitch 600X and control ports 1 through 4 of the main UNPACKING chassis. Setting the switches to “Auto” enables the port to determine the speed and duplex mode automatically.
Need help?
Do you have a question about the FlexSwitch 600X and is the answer not in the manual?
Questions and answers