Page 1
1.888.880.4884 Assembly Instructions Item Number: SBP001-1/2 Product Name: Family Dinner Table Set with Metal Legs PRE-ASSEMBLY PREPARATION: Please check all contents of this package before attempting to assemble the product. A full checklist of components is provided. If any components are missing, please contact our customer service number above.
Page 2
Parts Identification (cont.): CODE PARTS CODE PARTS Box 2 2PCS Box 1 Box 2 Box 1 Box 2 2PCS 2PCS Additional Tools Required: Philips Screwdriver or Power Screwdriver...
Page 3
Step By Step Assembly Instructions Step 1: LONG BENCH Attach the long back frame (O ) to legs (I and J ) and secure with bolts (4) using allen key (9). Do not fully tighten bolts yet. Attach the long seat frame (Q ) to leg (I ) and secure with bolts (1) and washer (7), then attach it to leg (J...
Page 4
Step 2: LONG BENCH Attach the middle leg (N ) to seat frame (Q ) and secure with bolts (3) using allen key (9). Attach the short front rails (Z ) to legs (I and J ) and secure with bolts (4) using allen key (9).
Page 5
Step 3: SHORT BENCH Attach the short back frame (P ) to legs (K and L ) and secure with bolts (4) using allen key (9). Do not fully tighten bolts yet. Attach the short seat frame (R ) to leg (L ) and secure with bolts (1) and washer (7), then attach it to leg (K...
Page 6
Step 4: CORNER BENCH Attach the corner seat frame (M ) to the assembled benches as shown and secure with bolts (2) using allen key (9). Attach the corner back frames (V and U ) to the assembled benches as shown and secure with bolts (4) using allen key (9).
Page 7
Step 5: BACK CUSHIONS Note: Firstly position all seat cushions (A ) and backrest cushions (D in place as shown and make sure to leave no gap between the seat and back cushions. Then secure the backrest cushions (D and G ) to back frames (O and H...
Step 6: SEAT CUSHIONS Carefully position the corner bench sideways as shown and attach the seat cushions (A and C ) to seat frames (Q and M ) and secure with screw (5) using Philips screwdriver. (Power screwdriver recommended). ...
Page 9
Step7: CORNER SHELF AND LEG Attach the corner shelf (T ) to corner back frame (U ) and secure with bolt (2) and washer (8) using allen key (9). Attach the corner leg (S ) to corner shelf (T ) and secure with bolts (4) using allen key (9).
Page 10
Step 8: Assembly for corner bench is complete.
Page 11
2 – TABLE Parts and Fittings Identification: CODE PARTS CODE FITTINGS Box 2 Box 2 16PCS 12mm 4PCS 10PCS 2PCS 2PCS...
Page 12
Step By Step Assembly Instructions Step 1: TABLE LEGS Attach the side rails (C and D ) to legs (B ) and secure with bolt (4) using allen key (6).
Step 2: TABLE TOP Place the table top (A ) upside down on a protected surface. Position the assembled table frame on the table top as shown and secure with screws (5) using a Philips screwdriver. (Power screwdriver recommended). ...
Page 14
Step 3: TABLE Carefully turn over the unit and assembly for the table is complete.
Page 15
3 – BENCH Parts and Fittings Identification: CODE PARTS CODE FITTINGS Box 1 Box 2 4PCS 45mm Box 2 2PCS 30mm 4PCS 12mm 4PCS 2PCS 4PCS...
Page 16
Step By Step Assembly Instructions Step 1: FRAME Attach the seat frame (B ) to legs (C ) and secure with bolts (1) and washer (7) using allen key (6). Attach the side rails (E ) to legs (C ) and secure with bolts (4) using allen key (6).
Page 17
Step 2: CUSHION Place the seat cushion (A ) upside down on a protected surface. Position the assembled bench frame on the cushion as shown and secure with screws (5) using a Philips screwdriver. (Power screwdriver recommended).
Page 18
Step 3: BENCH Carefully turn over the bench and assembly is complete.
Need help?
Do you have a question about the SBP001-1/2 and is the answer not in the manual?
Questions and answers