Table of Contents
Advertisement
Installing the Router
Connect the ADSL Line and Telephone
Connect one end of an RJ-11 cable from your ADSL connection and the other
end to the LINE port of the router. Use a second RJ-11 cable to connect
between a telephone and the PHONE port of the router.
Connect the PC to the Router
Use the Ethernet cable to connect your computer directly to the router.
Connect one end of the Ethernet cable to one of the 4 ports labeled LAN on
the rear panel of the router and connect the other end to the Ethernet port
of your computer. Attach any additional PCs to the router using RJ-45
cables to the port labeled LAN on the rear panel of the router.
Connect the Power Adapter
Complete the process by connecting the AC power adapter to the POWER
connector on the back of the device and plug the adapter into a wall outlet
or power strip. Then turn on and boot up your PC and any LAN devices, such
as hubs or switches, and any computers connected to them.
7
Zhone Bonded Channel
User Manual
Version 1.1
Document #: BD-ZU0007-11
Advertisement
Table of Contents
