ICC ICX400GAP Web Manual page 37

ICX420GAP Manual ICX420GAP Manual ICX420GAP Manual
Satellite AP configuration: Satellite AP configuration: Satellite AP configuration:
1. On the AP that is chosen as a satellite AP go to the web interface of the AP and 1. On the AP that is chosen as a satellite AP go to the web interface of the AP and 1. On the AP that is chosen as a satellite AP go to the web interface of the AP and
click on the WDS page. click on the WDS page. click on the WDS page.
2. Select the radio (1-2) on which the wireless bridging needs to be configured. 2. Select the radio (1-2) on which the wireless bridging needs to be configured. 2. Select the radio (1-2) on which the wireless bridging needs to be configured.
a. The ICX420GAP is a dual band AP supporting 2.4 GHz and 5 GHz bands a. The ICX420GAP is a dual band AP supporting 2.4 GHz and 5 GHz bands a. The ICX420GAP is a dual band AP supporting 2.4 GHz and 5 GHz bands
simultaneously simultaneously simultaneously
3. Select WDS mode as SatelliteAP, 3. Select WDS mode as SatelliteAP, 3. Select WDS mode as SatelliteAP,
4. Enter the MAC address of RootAP under Remote-MAC 4. Enter the MAC address of RootAP under Remote-MAC 4. Enter the MAC address of RootAP under Remote-MAC
5. Select the security and enter the WPA security key. (Note: the WDS SSID and 5. Select the security and enter the WPA security key. (Note: the WDS SSID and 5. Select the security and enter the WPA security key. (Note: the WDS SSID and
security key should be same on the both the Root AP and satellite AP in order to security key should be same on the both the Root AP and satellite AP in order to security key should be same on the both the Root AP and satellite AP in order to
connect them.) connect them.) connect them.)
Wait for a few second and see that link state changes to Linked from Unlinked. Wait for a few second and see that link state changes to Linked from Unlinked. Wait for a few second and see that link state changes to Linked from Unlinked.
37 37 37